Cisco CRS User Manual

Management Plane Protection Commands
This module describes the commands used to configure management plane protection (MPP).
For detailed information about keychain management concepts, configuration tasks, and examples, see the
Implementing Management Plane Protection on the Cisco IOS XR Software module in the Cisco IOS XR
System Security Configuration Guide for the Cisco CRS Router Software configuration module.
•
address ipv4 (MPP), page 164
•
allow, page 166
•
control-plane, page 169
•
inband, page 170
•
interface (MPP), page 172
•
management-plane, page 174
•
out-of-band, page 175
•
show mgmt-plane, page 177
•
vrf (MPP), page 179
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 163

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs