show radius accounting
To obtain information and detailed statistics for the RADIUS accounting server and port, use the show radius
accounting command in EXEC mode.
show radius accounting
Syntax Description
This command has no keywords or arguments.
Command Default
If no RADIUS servers are configured on the router, the output is empty. If the default values are for the counter
(for example, request and pending), the values are all zero because the RADIUS server was just defined and
not used yet.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
Task ID
OperationsTask ID
readaaa
Examples
The following sample output is displayed on a per-server basis for the show radius accounting command:
RP/0/RP0/CPU0:router# show radius accounting
Server: 12.26.25.61, port: 1813
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
Server: 12.26.49.12, port: 1813
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
Server: 12.38.28.18, port: 29199
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
78 OL-24740-01
Authentication, Authorization, and Accounting Commands
show radius accounting
To Next Page
Loading...
Need help?
General
