Cisco CRS User Manual

show key chain
To display the keychain, use the show key chain command.
show key chain key-chain-name
Syntax Description
Names of the keys in the specified keychain. The maximum number of
characters is 32.
key-chain-name
Command Default
If the command is used without any parameters, then it lists out all the key chains.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
Task ID
OperationsTask ID
readsystem
Examples
When a secure key storage becomes available, it is desirable for keychain management to alternatively prompt
you for a master password and display the key label after decryption. The following example displays only
the encrypted key label for the show key chain command:
RP/0/RP0/CPU0:router# show key chain isis-keys
Key-chain: isis-keys/ -
accept-tolerance -- infinite
Key 8 -- text "8"
cryptographic-algorithm -- MD5
Send lifetime: 01:00:00, 29 Jun 2006 - Always valid [Valid now]
Accept lifetime: 01:00:00, 29 Jun 2006 - Always valid [Valid now]
Related Commands
DescriptionCommand
Accepts the valid key.accept-lifetime, on page 146
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
158 OL-24740-01
Keychain Management Commands
show key chain

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English