show user
To display all user groups and task IDs associated with the currently logged-in user, use the show user
command.
show user [all| authentication| group| tasks]
Syntax Description
(Optional) Displays all user groups and task IDs for the currently logged-in user.all
(Optional) Displays authentication method parameters for the currently logged-in
user.
authentication
(Optional) Displays the user groups associated with the currently logged-in user.group
(Optional) Displays task IDs associated with the currently logged-in user. The
tasks keyword indicates which task is reserved in the sample output.
tasks
Command Default
When the show user command is used without any option, it displays the ID of the user who is logged in
currently.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 2.0
The following enhancements are added:
•
An example was added to display all the group and tasks.
•
The authentication keyword was added.
•
The sample output for the group keyword was updated.
•
The sample output to display whether or not a task is reserved for the tasks
keyword was updated.
Release 3.3.0
Usage Guidelines
Use the show user command to display all user groups and task IDs associated with the currently logged-in
user.
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 93
Authentication, Authorization, and Accounting Commands
show user