Cisco CRS User Manual

show radius
To display information about the RADIUS servers that are configured in the system, use the show radius
command.
show radius
Syntax Description
This command has no keywords or arguments.
Command Default
If no radius servers are configured, no output is displayed.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
Use the show radius command to display statistics for each configured RADIUS server.
Task ID
OperationsTask ID
readaaa
Examples
The following sample output is for the show radius command:
RP/0/RP0/CPU0:router# show radius
Global dead time: 0 minute(s)
Server: 1.1.1.1/1645/1646 is UP
Timeout: 5 sec, Retransmit limit: 3
Quarantined: No
Authentication:
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Accounting:
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
Server: 2.2.2.2/1645/1646 is UP
Timeout: 10 sec, Retransmit limit: 3
Authentication:
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
76 OL-24740-01
Authentication, Authorization, and Accounting Commands
show radius

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs