show sam log
To display the contents of the Software Authentication Manager (SAM) log file, use the show sam log
command.
show sam log [ lines-number ]
Syntax Description
(Optional) Number of lines of the SAM log file to display, in the range from 0 to 200,
where 0 displays all lines in the log file and 200 displays the most recent 200 lines (or
as many lines as there are in the log file if there are fewer than 200 lines).
lines-number
Command Default
The show sam log command without a lines-number argument displays all the lines in the log file.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 2.0
Usage Guidelines
The SAM log file records changes to the SAM tables, including any expired or revoked certificates, table
digest mismatches, and SAM server restarts.
Task ID
OperationsTask ID
readcrypto
Examples
The following sample output is from the show sam log command:
RP/0/RP0/CPU0:router# show sam log
06/16/02 12:03:44 UTC Added certificate in table root/1 CN = Certificate Manage, 0x01
06/16/02 12:03:45 UTC SAM server restarted through router reboot
06/16/02 12:03:47 UTC Added CRL in table CN = Certificate Manage, updated at Nov 10, 2001
04:11:42 GMT
06/16/02 12:03:48 UTC Added certificate in table mem:/1 CN = Certificate Manage, 0x1e
06/16/02 12:16:16 UTC SAM server restarted through router reboot
06/16/02 12:25:02 UTC SAM server restarted through router reboot
06/16/02 12:25:04 UTC Added certificate in table mem:/1 CN = Certificate Manage, 0x1e
06/16/02 12:39:30 UTC SAM server restarted through router reboot
06/16/02 12:39:30 UTC SAM server restarted through router reboot
06/16/02 12:40:57 UTC Added certificate in table mem/1 CN = Certificate Manage, 0x1e
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
248 OL-24740-01
Software Authentication Manager Commands
show sam log
To Next Page
Loading...
Need help?
General
