Cisco CRS User Manual

Secure Socket Layer Protocol Commands
This module describes the commands used to configure the Secure Socket Layer (SSL) protocol.
For detailed information about SSL concepts, configuration tasks, and examples, see the Implementing Secure
Socket Layer on the Cisco IOS XR Software module in the Cisco IOS XR System Security Configuration
Guide for the Cisco CRS Router.
•
show ssl, page 288
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 287

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs