show radius server-groups
To display information about the RADIUS server groups that are configured in the system, use the show
radius server-groups command.
show radius server-groups [group-name [detail]]
Syntax Description
(Optional) Name of the server group.The properties are displayed.
group-name
(Optional) Displays properties for all the server groups.detail
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Support was added for the group-name argument and detail
keyword.
Release 3.4.0
Usage Guidelines
Use the show radius server-groups command to display information about each configured RADIUS server
group, including the group name, numbers of servers in the group, and a list of servers in the named server
group. A global list of all configured RADIUS servers, along with authentication and accounting port numbers,
is also displayed.
Task ID
OperationsTask ID
readaaa
Examples
The inherited global message is displayed if no group level deadtime is defined for this group; otherwise, the
group level deadtime value is displayed and this message is omitted. The following sample output is for the
show radius server-groups command:
RP/0/RP0/CPU0:router# show radius server-groups
Global list of servers
Contains 2 server(s)
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
86 OL-24740-01
Authentication, Authorization, and Accounting Commands
show radius server-groups
To Next Page
Loading...
Need help?
General
