Cisco D9800 User Manual

DescriptionCommand Detail
Either (using body data from command line)
POST –-header "Content-type:application/xml" –d
"<input>some_XML_body_data</input>"
"https://192.168.0.1/ws/v2/service_cfg/input"
OR (using body data from XML file)
POST –-header "Content-type:application/xml" –d
@"C:/your_path/input.xml" "https://192.168.0.1/ws/v2/service_cfg/input"
POST Syntax
Table 133: URI Parameters (extension to the Command URL separated by /)
DescriptionURI Parameter
By default (no additional URL extension), all data is
returned in a GET, and any data may be set in a
POST.
See following command sections for API syntax that
extends this command URL and allows returning or
setting a categorized subset of the fields.
default
URI Query/Set Arguments (possible fields and values preceded by ? and separated by &): N/A
Input XML Field Descriptions:
The XML parameters are as described in each of the following input configuration API sections Arguments
options
Output Fields:
Output fields returned in GET results are the same names used for the possible Arguments when appending
each possible URI Parameter to this command.
POST (Settings Write) Examples:
Input with invalid setting (Setting Parameters using XML body data from command line):
curl -k -X POST -H "X-SESSION-ID: $token" --header "Content-type:application/xml" -d
"<input><rf><port>1</port><act>Yes</act><dnlkfreq>3.40></dnlkfreq></rf><rf><port>2</port><dnlkfreq>3.40</dnlkfreq></rf></input>"
"https://192.168.0.1/ws/v2/service_cfg/input"
Expected output (values are for example purposes only) when validation of input parameter(s) fail:
<?xml version="1.0" encoding="ISO-8859-1" ?>
<response><code>10</code><result>failure</result><message>the downlink frequency band did
not match the LO frequency band</message></response>
Input with valid setting (Setting Parameters using XML body data from command line):
curl -k -X POST -H "X-SESSION-ID: $token" --header "Content-type:application/xml" -d
"<input><rf><port>1</port><act>Yes</act><dnlkfreq>12.31></dnlkfreq></rf><rf><port>2</port><dnlkfreq>3.40</dnlkfreq></rf></input>"
"https://192.168.0.1/ws/v2/service_cfg/input"
Expected output (values are for example purposes only) when validation of input parameter(s) pass:
<?xml version="1.0" encoding="ISO-8859-1" ?>
<response><code>10</code><result>success</result><message></message></response>
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
136
API Definitions
Input Configuration Command

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English