Cisco D9800 User Manual

Advanced Audio Decode Configuration Command
Table 191: Command Details
DescriptionCommand Detail
Advanced Audio On/Off Control:
https://192.168.0.1/ws/v2/service_cfg/decode/advaudio_control
Advance Audio Settings: HDMI:
https://192.168.0.1/ws/v2/service_cfg/decode/advaudio_hdmi
Advanced Audio Settings: SDI:
https://192.168.0.1/ws/v2/service_cfg/decode/advaudio_sdi
Command URL
Allows set or get of decode settings for advanced audio parameters.Command Information
GET, POSTHTTP Methods
Read, WriteAccess Type
User, AdminAccess Level
Advanced Audio Control
GET "https://192.168.0.1/ws/v2/service_cfg/decode/ advaudio_control"
HDMI Advanced Audio Settings
All HDMI Audio Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/decode/advaudio_hdmi"
HDMI Audio Setting for specified HDMI instance/pair/slot:
GET "https://192.168.0.1/ws/v2/service_cfg/decode/
advaudio_hdmi?hdmiindex=1&pair=1&slot=1&decoder=2"
SDI Advanced Audio Settings
All SDI Audio Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/decode/advaudio_sdi"
Audio Setting for specified SDI instance/group/slot:
GET "https://192.168.0.1/ws/v2/service_cfg/decode/
advaudio_sdi?sdiindex=1&group=1&slot=1"
GET Syntax
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
228
API Definitions
Decode Configuration Commands

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English