Cisco D9800 User Manual

PE Configuration Command
Table 149: Command Details
DescriptionCommand Detail
https://192.168.0.1/ws/v2/service_cfg/peCommand URL
Allows set or get of PE information.Command Information
GET, POSTHTTP Methods
Read/WriteAccess Type
User, AdminAccess Level
One of the following:
GET https://192.168.0.1/ws/v2/service_cfg/pe, or
GET "https://192.168.0.1/ws/v2/service_cfg/pe? peid=[peid#]"
GET Syntax
POST "https://192.168.0.1/ws/v2/service_cfg/pe?
peid=[peid#]&chn=[chn#]"
POST Syntax
URI Parameters (extension to the Command URL separated by /): N/A
For GET, the URI arguments do not need any values to dump info for all PEs. To GET info for a specific PE,
specify the peid argument and value. For POST, specify the peid argument and value, and the chn argument
followed by the associated value the user would like to map. Muliple peids may be mapped by using the input
file syntax for POST command. In-depth CURL examples can be seen below following the table.
Table 150: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
DescriptionURI Argument
Program Entry Identifier
Type: Integer
Value: 1..32
When not specified on a GET, all PEs are returned.
peid (key)
Channel Number to be configured on this Program Entry
Type: Integer
No value required on GET (but may be used as filter for requested output,
eg &chn&…)
POST Values: 0 .. 65535
chn
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
173
API Definitions
PE Configuration Command

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English