Cisco D9800 - SDI Decode Configuration Command

SDI Decode Configuration Command
Table 185: Command Details
DescriptionCommand Detail
SDI Audio:
https://192.168.0.1/ws/v2/service_cfg/decode/sdiaudio
SDI VANC:
https://192.168.0.1/ws/v2/service_cfg/decode/sdivanc
SDI VII:
https://192.168.0.1/ws/v2/service_cfg/decode/sdivii
Command URL
Allows set or get of decode settings for SDI parameters.Command Information
GET, POSTHTTP Methods
Read, WriteAccess Type
User, AdminAccess Level
SDI Audio:
GET "https://192.168.0.1/ws/v2/service_cfg/decode/sdiaudio", or
GET "https://192.168.0.1/ws/v2/service_cfg/decode/sdiaudio?
group=1&slot=1&sdiindex=1&decoder"
SDI VANC (Vertical Ancillary Data):
GET "https://192.168.0.1/ws/v2/service_cfg/decode/sdivanc", or
GET "https://192.168.0.1/ws/v2/service_cfg/decode/sdivanc?
serviceid=AFD&sdiindex=1&enable"
SDI VII:
GET "https://192.168.0.1/ws/v2/service_cfg/decode/sdivii", or
GET "https://192.168.0.1/ws/v2/service_cfg/decode/sdivii? sdiindex=1"
GET Syntax
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
223
API Definitions
Decode Configuration Commands