Cisco D9800 User Manual

In GET URIs only, the entry selection argument (stream) must contain a value, all other arguments DO
NOT contain values.
Note
curl -X GET -i -H "Accept: application/json" -H "X-SESSION-ID: $token" -k
"https://192.168.0.1/ws/v2/service_cfg/input/abr?stream=2&camode&js=1"
If successful, the return body will be:
"input": {
"abr": {
"stream": "2",
"camode": "Std" }
}
Example 5: GET multiple ABR tuning value for a specific ABR stream
The following example assumes that the user has successfully logged onto the unit, received the session ID,
and set it to the variable token. In addition, it is assumed that the IP of the unit is 192.168.0.1. You must
change the IP to the specific unit IP in use. This example retrieves multiple parameter values from the ABR
settings. This example retrieves the camode, sdten, niten and paten values from ABR stream 2.
In GET URI’s only the entry selection argument (stream) must contain a value, all other arguments DO
NOT contain values.
Note
curl -X GET -i -H "Accept: application/json" -H "X-SESSION-ID: $token" -k
"https://192.168.0.1/ws/v2/service_cfg/input/abr?stream=2&camode&sdten&paten&niten&js=1"
If successful, the return body will be:
"input": {
"abr": {
"stream": "2",
"camode": "Std",
"niten": "No",
"paten": "Yes",
"sdten": "Yes" }
}
Zixi Input Configuration Command
Table 147: Command Details
DescriptionCommand Detail
https://192.168.0.1/ws/v2/service_cfg/input/zixiCommand URL
Allows ZIXI input settings to be read or configured.Command Information
GET, POSTHTTP Methods
Read/Write (with complex input data)Access Type
User, AdminAccess Level
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
166
API Definitions
Zixi Input Configuration Command

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English