Cisco D9800 - Disaster Recovery (DR) Backup Channels Configuration Command

"rowstatus": "Inactive"
},
{
"csirec": "3",
"fec": "Auto",
"dnlkfreq": "3.449",
"input": "RF1",
"mod": "DVB-S",
"netid": "1",
"symrate": "28.3465",
"rolloff": ".35",
"rowstatus": "Inactive"
}
]
}
Disaster Recovery (D/R) Backup Channels Configuration Command
Table 219: Command Details
DescriptionCommand Detail
https://192.168.0.1/ws/v2/service_cfg/dr/channelsCommand URL
Allows set or get of D/R backup channel configuration.Command Information
GET, POSTHTTP Methods
Read, WriteAccess Type
User, AdminAccess Level
All D/R backup channels Settings
GET "https://192.168.0.1/ws/v2/service_cfg/dr/channels"
Single D/R backup channels Setting
GET
"https://192.168.0.1/ws/v2/service_cfg/dr/channels?peid=PE1&csirec=1&
bkpchan"
GET Syntax
POST, for example,
"https://192.168.0.1/ws/v2/service_cfg/dr/channels?peid=PE1&csirec=1&bkpchan=201"
POST Syntax
Setting Parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
For POST, the value for the argument seen below must be specified, but for GET, there are no values
for arguments.
Note
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
263
API Definitions
Disaster Recovery (D/R) Configuration API