Cisco D9800 User Manual

DescriptionURI Argument
D/R backup tuning FEC Mode
Type: String
Values: "Auto", "1/2", "2/3", "3/4", "5/6", "7/8", "8/9"
fec
D/R backup tuning RF rolloff
Type: String
Values: ".20", ".25", ".35", "Auto"
rolloff
POST Examples
Example 1: Set various D/R backup transport Arguments
The following example assumes that the user has successfully logged onto the unit, received the session id
and set it to the variable token. In addition, it is assumed that the IP of the unit is 192.168.0.1. You must
change the IP to the specific unit IP in use. This example set the commode to Std.
curl -X POST -i -H "Accept: application/json" -H "X-SESSION-ID: $token" -k
"https://192.168.0.1/ws/v2/service_cfg/dr/tuning?&csirec=1&rowstatus=Active&input=RF2
&dnlkfreq=3.53&symrate=30"
If successful, the return body will be:
"response": {
"code": "10",
"result": "success",
"message": ""
}
GET Examples
Example 2: Retrieve the full D/R backup Settings
The following example assumes that the user has successfully logged onto the unit, received the session id
and set it to the variable token. In addition, it is assumed that the IP of the unit is 192.168.0.1. You must
change the IP to the specific unit IP in use.
curl -X GET -i -H "Accept: application/json" -H "X-SESSION-ID: $token" -k
"https://192.168.0.1/ws/v2/service_cfg/dr/tuning"
If successful, the return body will be:
"dr": {
"tuning": [
{
"csirec": "1",
"fec": "Auto",
"dnlkfreq": "3.53",
"input": "RF2",
"mod": "DVB-S",
"netid": "1",
"symrate": "30.0",
"rolloff": ".35",
"rowstatus": "Active"
},
{
"csirec": "2",
"fec": "Auto",
"dnlkfreq": "3.449",
"input": "RF1",
"mod": "DVB-S",
"netid": "1",
"symrate": "28.3465",
"rolloff": ".35",
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
262
API Definitions
Disaster Recovery (D/R) Configuration API

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English