If successful, the following is an example of the return body:
"response": {
"code": "10",
"result": "success",
"message": ""
}
GET Examples:
Example 2: Retrieve the full PowerVu CA Settings
The following example assumes that the user has successfully logged onto the unit, received the session id
and set it to the variable token. In addition, it is assumed that the IP of the unit is 192.168.0.1. You must
change the IP to the specific unit IP in use.
curl -X GET -i -H "Accept: application/json" -H "X-SESSION-ID: $token" -k
"https://192.168.0.1/ws/v2/service_cfg/ca/pvu"
If successful, the following is an example of the return body:
"ca": {
"pvu": {
"camode": "Std"
}
}
Running with the specific camode argument will return the same response as above, as PowerVu CA only
has one argument.
Note
BISS CA Configuration Command
Table 199: Command Details
DescriptionCommand Detail
https://192.168.0.1/ws/v2/service_cfg/ca/bissCommand URL
Allows set or get of BISS Conditional Access configuration.Command Information
GET, POSTHTTP Methods
Read, WriteAccess Type
User, AdminAccess Level
All BISS Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/biss"
Single BISS Setting:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/biss?bissmode"
GET Syntax
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
235
API Definitions
CA (Conditonal Access) Configuration Commands
To Next Page
Loading...
Need help?
General
