If successful, the return body will look like:
"output": {
"asi": {
"pe": {
"peid": "PE1",
"outchan": "105",
"pmtpid": "8191"}
}
}
MOIP Output Stream Configuration
Table 165: Command Details
DescriptionCommand Detail
Single-stream (Basic, NTC MOIP), moip output port pair 1/2
https://192.168.0.1/ws/v2/service_cfg/output/moip/ipo, or
https://192.168.0.1/ws/v2/service_cfg/output/moip1/ipo
Single-stream (Basic): MOIP is not supported
Multi-stream unit, moip output port pair 1/2:
https://192.168.0.1/ws/v2/service_cfg/output/moip1/ipo
Multi-stream unit, moip output port pair 3/4:
https://192.168.0.1/ws/v2/service_cfg/output/moip2/ipo
Command URL
Allows set or get of MOIP Stream ID output parameters.Command Information
GET, POSTHTTP Methods
Read, WriteAccess Type
User, AdminAccess Level
Singlestream NTC MOIP unit:
GET "https://192.168.0.1/ws/v2/service_cfg/output/moip/ipo"
GET "https://192.168.0.1/ws/v2/service_cfg/output/moip1/ipo"
Multistream unit:
GET "https://192.168.0.1/ws/v2/service_cfg/output/moip1/ipo"
GET "https://192.168.0.1/ws/v2/service_cfg/output/moip2/ipo"
GET Syntax
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
197
API Definitions
Output Configuration Command
To Next Page
Loading...
