Cisco D9800 User Manual

DescriptionCommand Detail
Advanced Audio Control
POST "https://192.168.0.1/ws/v2/service_cfg/decode/
advaudio_control?enable=Yes"
HDMI Advanced Audio Settings
POST "https://192.168.0.1/ws/v2/service_cfg/decode/
advaudio_hdmi?hdmiindex=1&pair=1&slot=1&decoder=2&
chan=Downmix%20Right"
SDI Advanced Audio Settings
POST "https://192.168.0.1/ws/v2/service_cfg/decode/
advaudio_sdi?sdiindex=1&group=1&slot=1&
input=PCM%20Pair%201&chan=Right/Left"
POST Syntax
Setting parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
All of the URI Arguments listed for HDMI Settings apply to both GET and POST. For GET, the
URI arguments do not need any values, except ‘hdmiindex’ which must be specified. For POST all
keys must be specified followed by any of the below non-key URI arguments and the associated
value the user would like to set. The GET result output field names re-use the argument names and
possible values.
Note
Table 192: Advanced Audio Control URI Query/Set Arguments (possible fields and values preceded by ? and separated
by &)
DescriptionAdvanced Audio Control URI Argument
Advanced Audio Control
Type: String
Value: "Yes", "No"
enable
Table 193: HDMI Settings URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
DescriptionHDMI Settings URI Argument
HDMI Device Instance
Type: Integer
Value: 1..2
hdmiindex (key)
PCM Pair
Type: Integer
Value: 1..4
pair (key)
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
229
API Definitions
Decode Configuration Commands

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English