Cisco D9800 User Manual

DescriptionURI Argument
Enable SDT Reception
Type: String
Values: "Yes", "No"
sdten
Enable PAT Reception
Type: String
Values: "Yes", "No"
paten
ABR settings name
Type: String
Value: Up to 12 characters
name
ABR settings URL
Type: String
Value: Up to 200 characters
url
ABR settings target latency
Type: Integer
Values: 0.. 4294967295
latency
ABR settings physical port
Type: String
Values: "Mngmt", "Data1", "Data2", "Data3", "Data4"
phyport
Add or Delete an instance of ABR Input
Type: String
Values: "Add" (R/W), "Delete" (R/W), "Active" (RO), "Inactive"
(RO)
cmdrow
ABR settings minimum latency
Type: Integer
Values: 0.. 4294967295
minlatency
Output Fields:
Output fields returned in GET results are the same names used for the possible Arguments for this command.
POST Examples:
Example 1: Changing one ABR Parameter
The following example assumes that the user has successfully logged onto the unit, received the session id,
and set it to the variable token. In addition, it is assumed that the IP of the unit is 192.168.0.1. You must
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
164
API Definitions
ABR Input Configuration Command

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English