Table 156: Additional arguments (preceded by ? and separated by & on command line)
DescriptionArgument
Resynchronize ALL PE Output (applies to POST syntax only)
Type: Integer
Value: 1..4
1: Resynchronize Program, PMT PID, ES list & ES PIDs
2: Resynchronize ES list
3: Resynchronize ES PIDs
4: Resynchronize Template ES List & PIDs
Currently, only value 1 is supported. All the other inputs
(2, 3, and 4) are handled as 1.
Note
resync
Format output using JSON standard (applies to command line input
only).
Type: exist
Values: any value or empty (any of js=1, js, js=0, or js=9999 are
valid)
Omitting this argument formats the output by default in XML.
js
Example Read (GET) commands (results for single-stream unit shown):
curl -k -H "X-SESSION-ID: $token" "https://192.168.0.1/ws/v2/service_cfg/output"
Expected output (values are for example purposes only):
<?xml version="1.0" encoding="ISO-8859-1" ?>
<output><asi><mode>Service Channels Only</mode><dscrmode>Descrambled</dscrmode><ratemode>User
</ratemode><rate>68.5</rate><insertnul>Yes</insertnul><pe><peid>PE1</peid><action>Pass</action>
<pmtpid>5801</pmtpid><outchan>801</outchan></pe><pe><peid>PE2</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE3</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE4</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE5</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE6</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE7</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE8</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE9</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE10</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE11</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE12</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE13</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE14</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE15</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe><pe><peid>PE16</peid><action>Pass</action>
<pmtpid>8191</pmtpid><outchan>0</outchan></pe></asi><moip><mode>Service Channels Only</mode>
<dscrmode>Descrambled</dscrmode><ratemode>User</ratemode><rate>68.5</rate>
<insertnul>Yes</insertnul><mcastip>224.2.127.254</mcastip><destport>9875</destport>
<fecscheme>Block Aligned</fecscheme><tpperframe>7</tpperframe>
<redunmode>Backup: First Port</redunmode><redundir>Revertive</redundir>
<redundelfwd>0</redundelfwd><redundelbck>1</redundelbck><pe><peid>PE1</peid>
<action>Pass</action><pmtpid>5801</pmtpid><outchan>801</outchan></pe><pe>
<peid>PE2</peid><action>Pass</action><pmtpid>8191</pmtpid><outchan>0</outchan>
</pe><pe><peid>PE3</peid><action>Pass</action><pmtpid>8191</pmtpid><outchan>0</outchan>
</pe><pe><peid>PE4</peid><action>Pass</action><pmtpid>8191</pmtpid><outchan>0</outchan>
</pe><pe><peid>PE5</peid><action>Pass</action><pmtpid>8191</pmtpid><outchan>0</outchan>
</pe><pe><peid>PE6</peid><action>Pass</action><pmtpid>8191</pmtpid><outchan>0</outchan>
</pe><pe><peid>PE7</peid><action>Pass</action><pmtpid>8191</pmtpid><outchan>0</outchan>
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
183
API Definitions
Output Configuration Command
To Next Page
Loading...
