Cisco D9800 User Manual

DescriptionURI Argument
Output Rate Control Mode
Type: String
Value: "User"
ratemode
Output Rate
Type: Float
Values: 0.0 ….. 206.0
rate
Insert Null Packet
Type: String
Values: "Yes", "No"
insertnul="No" is not allowed with ratemode="User"
insertnul
Table 159: Additional arguments (preceded by ? and separated by & on command line)
DescriptionArgument
Resynchronize ALL PE Output
Type: Integer
Value: 1..4
1: Resynchronize Program, PMT PID, ES list & ES PIDs
2: Resynchronize ES list
3: Resynchronize ES PIDs
4: Resynchronize Template ES List & PIDs
resync
Format output using JSON standard (applies to command line input only)
Type: exist
Values: any value or empty (any of js=1, js, js=0, or js=9999 are valid)
Omitting this argument formats the output by default in XML.
js
For resync operation, only HTTP data body is supported. POST from XML/JSON file is not supported.
As noted in Get, on page 3, in the URL input, the space in STRING should be replaced by %20, for
example: "https://192.168.0.1/ws/v2/service_cfg/output/asi?mode=Map%20Service%20Channels%20Only.
Note
POST Examples:
Example 1: Set Various Output ASI Parameters
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
186
API Definitions
Output Configuration Command

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English