Cisco D9800 User Manual

DescriptionURI Argument
Insert Null Packet
Type: String
Values: "Yes", "No"
insertnul="No" is not allowed with ratemode="User"
insertnul
Set valid SAP destination IP address (multicast only)
Type: String
Value: IP address in dot format, for example, 224.2.127.254
mcastip
Set the SAP UDP destination port number
Type: Integer
Value: 1024..65534
destport
FEC arrangement : Block-aligned (0) or Non Block-aligned
Type: String
Values: "Block Aligned", "Non-Block Aligned"
fecscheme
Set the number of transport packets to be sent per IP packet
Type: Integer
Value: 1..7
tpperframe
Redundancy Mode
Type: String
Values: "Mirroring", "Backup: First Port", "Backup: Second Port", "Manual:
First Port", "Manual: Second Port"
redunmode
Switchover direction
Type: String
Values: "Non-Revertive" or "Revertive"
redundir
Delay before switching from Main to Backup port, in ms
Type: Integer
Value: 0..10000
redundelfwd
Delay before switching from Backup to Main port, in sec
Type: Integer
Value: 0..120
redundelbck
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
190
API Definitions
Output Configuration Command

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English