Cisco D9800 User Manual

DescriptionCommand Detail
User, AdminAccess Level
All PE CA Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/pe"
Single PE CA Setting:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/pe? peid=1&cidecrypt
GET Syntax
POST "https://192.168.0.1/ws/v2/service_cfg/pe? peid=1&cidecrypt=ON"POST Syntax
Setting parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
These arguments are intended to be used with POST. When this command is used as a GET command
these arguments generally serve as output field descriptions.
Note
Table 204: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
DescriptionURI Argument
Program Entry ID
Type: Integer
Value: 1..32
peid
Program CAM Decrypt Mode
Type: String
Value: "OFF", "ON", "Comp"
cidecrypt
CAM Slot for Program Entry 1
Type: String
Value: "TOP", "BOTTOM", "AUTO"
cipe1slot
CAM Slot for Program Entries other the PE1
Type: String
Value: "TOP", "BOTTOM"
cislot
POST Examples:
Example 1: Set various PE Setting Arguments
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
240
API Definitions
CA (Conditonal Access) Configuration Commands

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English