Cisco D9800 User Manual

DescriptionCommand Detail
All CICOMP CA Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/cicomp"
Single CICOMP CA Setting:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/cicomp?
peid=1&cidecrypt"
GET Syntax
POST "https://192.168.0.1/ws/v2/service_cfg/ca/cicomp?
idx=5&peid=1&cidecrypt=ON&oper=Add"
POST Syntax
Setting parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
These arguments are intended to be used with POST. When this command is used as a GET command
these arguments generally serve as output field descriptions
Note
Table 206: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
DescriptionURI Argument
Index of Row in UIC Table
Type: Integer
Value: 1..64
idx (Key)
Mandatory for POST command
Program Entry ID
Type: Integer
Value: 1..32
peid
CI Component Mode
Type: String
Value: "PID", "STREAM"
mode
CI Component PID
Type: Integer
Value: 0..8192
pid
Stream Category
Type: String
Value: "VID", "AUD", "SUBT", "TTX", "USER"
strmcat
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
242
API Definitions
CA (Conditonal Access) Configuration Commands

Cisco D9800 Specifications

General

Brand	Cisco
Model	D9800
Category	Receiver
Language	English