DescriptionCommand Detail
ReadAccess Type
User, AdminAccess Level
GET "https://192.168.0.1/ws/v2/status/output/moip/pid",
GET "https://192.168.0.1/ws/v2/status/output/moip1/pid", or
GET "https://192.168.0.1/ws/v2/status/output/moip2/pid"
Syntax for getting MOIP status output
parameters
GET "https://192.168.0.1/ws/v2/status/output/asi/pid",
GET "https://192.168.0.1/ws/v2/status/output/asi1/pid", or
GET "https://192.168.0.1/ws/v2/status/output/asi2/pid"
Syntax for getting ASI status output
parameters
Table 55: URI <level_1> URI Parameters (extension to the Command URL separated by /)
DescriptionURI Level 1 Parameter
Output type is ASI.
On NTC Basic or NTC MOIP, the supported values are asi or asi2
for the unique asi output.
On NTC MS, the supported values are asi1 for bidirectional port
1 and asi2 for bidirectional port 2.
asi/asi1/as2
Output type is MOIP.
On NTC Basic, this call is not supported
On NTC MOIP, the supported values are moip or moip1 for the
unique IP output.
On NTC MS, the supported values are moip1 for IP output 1 and
moip2 for IP output 2.
moip/moip1/moip2
Table 56: URI <level_2> URI Parameters (extension to the Command URL separated by /)
DescriptionURI Level 2 Parameter
DPM PMT PID information.pid
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
73
API Definitions
Output Status Command
To Next Page
Loading...
