Cisco Firepower 1100

Register the FTD with the FMC
Register the FTD to the FMC.
Before you begin
• Gather the following information that you set in the FTD initial configuration:
• FTD management IP address or hostname, and NAT ID
• FMC registration key
Procedure
Step 1 In FMC, choose Devices > Device Management.
Step 2 From the Add drop-down list, choose Add Device.
Set the following parameters:
Cisco Firepower 1100 Getting Started Guide
130
Firepower Threat Defense Deployment with a Remote FMC
Register the FTD with the FMC