Cisco M10-RM - Page 14

Contents
xiv
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
Giving Priority to Voice Traffic 15-14
Giving Priority to Video Traffic 15-15
Configuring Filters 16-1
Understanding Filters 16-2
Configuring Filters Using the CLI 16-2
Configuring Filters Using the Web-Browser Interface 16-3
Configuring and Enabling MAC Address Filters 16-3
Creating a MAC Address Filter 16-4
Using MAC Address ACLs to Block or Allow Client Association to the Access Point 16-6
Creating a Time-Based ACL 16-8
ACL Logging 16-9
CLI Configuration Example 16-9
Configuring and Enabling IP Filters 16-9
Creating an IP Filter 16-11
Configuring and Enabling Ethertype Filters 16-12
Creating an Ethertype Filter 16-13
Configuring CDP 17-1
Understanding CDP 17-2
Configuring CDP 17-2
Default CDP Configuration 17-2
Configuring the CDP Characteristics 17-2
Disabling and Enabling CDP 17-3
Disabling and Enabling CDP on an Interface 17-4
Monitoring and Maintaining CDP 17-4
Configuring SNMP 18-1
Understanding SNMP 18-2
SNMP Versions 18-2
SNMP Manager Functions 18-3
SNMP Agent Functions 18-4
SNMP Community Strings 18-4
Using SNMP to Access MIB Variables 18-4
Configuring SNMP 18-5
Default SNMP Configuration 18-5
Enabling the SNMP Agent 18-5
Configuring Community Strings 18-6