Cisco M10-RM User Manual

C-26
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
Appendix C Error and Event Messages
External Radius Server Error Messages
External Radius Server Error Messages
Error Message RADUYS:response-authenticator decrypt fail, paklen 32
Explanation
This error message means that there is a mismatch in the RADIUS shared key between
the RADIUS server and the access point.
Recommended Action Make sure that the shared key used on the RADIUS server and the access point
are the same.
LWAPP Error Messages
Error Message LWAPP-3-CDP: Failure sending CDP Update to Controller. Reason “s”
Explanation
Couldn’t send access point CDP update to controller
Recommended Action No action is required.
Error Message LWAPP-3-CLIENTERRORLOG: “s”
Explanation
This log message indicates an LWAPP client error event. The message is logged to help
in troubleshooting LWAPP access point join problems.
Recommended Action No action is required.
Error Message LWAPP-3-CLIENTEVENTLOG: “s”
Explanation
This log message indicates an LWAPP client notification event. The message is logged
to help in troubleshooting LWAPP access point join problems.
Recommended Action No action is required.
Error Message LWAPP-3-UNSUPPORTEDRM: Got unsupported CCX RM Measurement “s” request
“d” from Controller.
Explanation
Got unsupported CCX radio managment measurement request from controller.
Recommended Action No action is required.
Error Message LWAPP-5-WRONG_DFS_SLOT: DFS action on non-DFS radio “d”
Explanation
DFS action on radio b/g
Recommended Action No action is required.

Cisco M10-RM Specifications

General

Brand	Cisco
Model	M10-RM
Category	Wireless Access Point
Language	English