22-6
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
Chapter 22 Wireless Device Troubleshooting
Checking the Top Panel Indicators
Indicators on 1130 Series Access Points
If your access point is not working properly, check the LED ring on the top panel or the Ethernet and
Radio LEDs in the cable bay area. You can use the LED indications to quickly assess the unit’s status.
Figure 22-5 shows the access point LEDs.
Figure 22-5 1130 Series Access Point LEDs
Note To view the Ethernet and Radio LEDs you must open the access point cover.
1 Status LED 3 Ethernet LED
2 Access point cover 4 Radio LED
To Next Page
Loading...
