CHAPTER
18-1
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
18
Configuring SNMP
This chapter describes how to configure the Simple Network Management Protocol (SNMP) on your
access point.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Command Reference for Cisco Aironet Access Points and Bridges for this release and to the Cisco IOS
Configuration Fundamentals Command Reference for Release 12.3.
This chapter consists of these sections:
• Understanding SNMP, page 18-2
• Configuring SNMP, page 18-5
• Displaying SNMP Status, page 18-12
To Next Page
Loading...
