CHAPTER
12-1
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
12
Configuring WDS, Fast Secure Roaming, Radio
Management, and Wireless Intrusion Detection
Services
This chapter describes how to configure your access points for wireless domain services (WDS), fast,
secure roaming of client devices, radio management, and wireless intrusion detection services (WIDS).
This chapter contains these sections:
• Understanding WDS, page 12-2
• Understanding Fast Secure Roaming, page 12-3
• Understanding Radio Management, page 12-5
• Understanding Layer 3 Mobility, page 12-5
• Understanding Wireless Intrusion Detection Services, page 12-6
• Configuring WDS, page 12-7
• Configuring Fast Secure Roaming, page 12-21
• Configuring Management Frame Protection, page 12-24
• Configuring Radio Management, page 12-28
• Configuring Access Points to Participate in WIDS, page 12-30
• Configuring WLSM Failover, page 12-32
For instructions on configuring WDS on a switch’s Wireless LAN Services Module (WLSM), refer to
the Catalyst 6500 Series Wireless LAN Services Module Installation and Configuration Note.
To Next Page
Loading...
Need help?
General
