12-27
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
Management Frame Protection
Beginning in privileged EXEC mode, follow these steps to configure the WDS:
Step 3
dot11 ids mfp detector Configures the access point as an MFP detector. When enabled,
the access point validates management frames it receives from
other access points. If it receives any frame that does not contain
a valid, and expected, MIC IE, it will report the discrepancy to the
WDS. The access point must be a member of a WDS.
Step 4
sntp server server IP address Enter the name or ip address of the SNTP server.
Step 5
end Return to the privileged EXEC mode.
Step 6
copy running-config
startup-config
(Optional) Save your entries in the configuration file.
Command Description
Command Description
Step 1
configure terminal Enter global configuration mode.
Step 2
dot11 ids mfp distributor Configures the WDS as an MFP distributor. When enabled, the
WDS manages signature keys, used to create the MIC IEs, and
securely transfers them between generators and detectors.
Step 3
end Return to the privileged EXEC mode.
Step 4
copy running-config
startup-config
(Optional) Save your entries in the configuration file.
To Next Page
Loading...
Need help?
General
