CHAPTER
17-1
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
17
Configuring CDP
This chapter describes how to configure Cisco Discovery Protocol (CDP) on your access point.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco
Aironet IOS Command Reference for Access Points and Bridges for this release and the Cisco IOS
Configuration Fundamentals Command Reference for Release 12.2.
This chapter contains these sections:
• Understanding CDP, page 17-2
• Configuring CDP, page 17-2
• Monitoring and Maintaining CDP, page 17-4
To Next Page
Loading...
