Cisco M10-RM User Manual

5-5
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-14209-01
Chapter 5 Administering the Access PointWireless Device Access
Protecting Access to Privileged EXEC Commands
This example shows how to change the enable password to l1u2c3k4y5. The password is not encrypted
and provides access to level 15 (traditional privileged EXEC mode access):
AP(config)# enable password l1u2c3k4y5
Step 3
end Return to privileged EXEC mode.
Step 4
show running-config Verify your entries.
Step 5
copy running-config startup-config (Optional) Save your entries in the configuration file.
The enable password is not encrypted and can be read in the wireless
device configuration file.
Command Purpose

Cisco M10-RM Specifications

General

Brand	Cisco
Model	M10-RM
Category	Wireless Access Point
Language	English