Cisco MDS 9000 Series Troubleshooting Guide

Send comments to mdsfeedback-doc@cisco.com.
Contents
vii
Cisco MDS 9000 Family Troubleshooting Guide
OL-5183-02, Cisco MDS SAN-OS Release 1.3
There is a Red Line Through the Switch. What’s Wrong? 62
There is a Dotted Orange Line Through the Switch. What’s Wrong? 62
Can I Upgrade Without Losing My Map Settings? 62
Are There Any Restrictions When Using Fabric Manager Across FCIP? 62
Running Cisco Fabric Manager with Multiple Interfaces 63
Specifying an Interface for Fabric Manager Server 63
Specifying an Interface for Performance Manager 63
Specifying an Interface for Fabric Manager Client or Device Manager 64
Configuring a Proxy Server 64
Clearing Topology Maps 64
Can I Use Fabric Manager in a Mixed Software Environment? 65
I NDEX

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available