PurposeCommand or Action
Compacts the zone database for the specified
VSAN to recover the zone ID released when
a zone was deleted.
zone compact vsan vsan-id
Example:
switch(config)# zone compact vsan 42
Step 3
Analyzing the Zone and Zone Set
To better manage the zones and zone sets on your switch, you can display zone and zone set information using
the show zone analysis command.
The following example shows how to display full zoning analysis:
switch# show zone analysis vsan 1
The following example shows how to display active zoning analysis:
switch# show zone analysis active vsan 1
See the command reference for your device for the description of the information displayed in the command
output.
Default Settings for Zones
The following table lists the default settings for basic zone parameters.
Table 23: Default Basic Zone Parameters
DefaultParameters
Denied to all members.Default zone policy
The full zone set(s) is not distributed.Full zone set distribute
Disabled.Enhanced zoning
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
154 OL-30895-01
Configuring and Managing Zones
Analyzing the Zone and Zone Set
To Next Page
Loading...
