Cisco Nexus 5500 Series NX-OS - Default Settings for Device Alias Services

PurposeCommand
Displays device alias information in the flogi
database.
show flogi database [pending]
Displays device alias information in the fcns database.show fcns database [pending]
Default Settings for Device Alias Services
The following table lists the default settings for device alias parameters.
Table 25: Default Device Alias Parameters
DefaultParameters
Enabled.Device alias distribution
Basic.Device alias mode
Effective database.Database in use
Pending database.Database to accept changes
Locked with the first device alias task.Device alias fabric lock state
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
OL-30895-01 165
Distributing Device Alias Services
Default Settings for Device Alias Services