vPC Topologies
When VNP ports are configured vPC topologies between an FCoE NPV bridge and an FCF, the following
limitations apply:
•
vPC spanning multiple FCFs in the same SAN fabric is not supported.
•
For LAN traffic, dedicated links must be used for FCoE VLANs between the FCoE NPV bridge and
the FCF connected over a vPC.
•
FCoE VLANs must not be configured on the inter-switch vPC interfaces.
•
VF port binding to a vPC member port is not supported for an inter-switch vPC.
Figure 6: VNP Ports in an Inter-Switch vPC Topology
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
68 OL-30895-01
Configuring FCoE NPV
vPC Topologies
To Next Page
Loading...
