Cisco Nexus 5500 Series NX-OS User Manual

PurposeCommand or Action
Deletes the specified domain ID from the
custom list.
switch# discover custom-list delete vsan vsan-id
domain domain-id
Step 2
Displaying SCSI LUN Information
Use the show scsi-targetand show fcns databasecommands to display the results of the discovery.
The following example displays the discovered targets:
switch# show scsi-target status
discovery completed
This command takes several minutes to complete, especially if the fabric is large or if several devices are
slow to respond.
Note
The following example displays the FCNS database:
switch# show fcns database
The following example displays the SCSI target disks:
switch# show scsi-target disk
The following example displays the discovered LUNs on all operating systems:
switch# show scsi-target lun os all
The following example displays the port WWN that is assigned to each operating system (Windows, AIX,
Solaris, Linux, or HPUX):
switch# show scsi-target pwwn
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
OL-30895-01 201
Discovering SCSI Targets
Displaying SCSI LUN Information

Cisco Nexus 5500 Series NX-OS Specifications

General

Brand	Cisco
Model	Nexus 5500 Series NX-OS
Category	Network Router
Language	English