Cisco Nexus 5500 Series NX-OS User Manual

Procedure
PurposeCommand or Action
Clears the FSPF statistics counters for the specified
interface in the specified VSAN.
switch# clear fspf counters vsan
vsan-id interface fc slot/port
Step 1
If this is a QSFP+ GEM, the slot/port syntax is
slot/QSFP-module/port.
Note
FSPF Routes
FSPF routes traffic across the fabric, based on entries in the FSPF database. These routes can be learned
dynamically or configured statically.
Fibre Channel Routes
Each port implements a forwarding logic, which forwards frames based on its FC ID. Using the FC ID for
the specified interface and domain, you can configure the specified route (for example, FC ID 111211 and
domain ID 3) in the switch with domain ID 1 (see the following figure).
Figure 38: Fibre Channel Routes
Configuring Fibre Channel Routes
You can configure a Fibre Channel route.
Procedure
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
switch# configure terminal
switch(config)#
Step 1
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
OL-30895-01 177
Configuring Fibre Channel Routing Services and Protocols
FSPF Routes

Cisco Nexus 5500 Series NX-OS Specifications

General

Brand	Cisco
Model	Nexus 5500 Series NX-OS
Category	Network Router
Language	English