Cisco RV082 - Small Business VPN Router User Manual

Cisco Small Business RV0xx Series Routers Administration Guide 36
3
- PPTP (Point-to-Point Tunneling Protocol): Choose this option if
required by your ISP. PPTP is a service used in Europe, Israel, and other
countries.
Specify WAN IP Address: The external IP address that your ISP
assigned to your account.
Subnet Mask: The subnet mask specified by your ISP.
Default Gateway Address: The IP address of the default gateway.
Username and Password: Enter the username and password for your
ISP account. The maximum number of characters is 60.
Connect on Demand: This feature may be helpful if you are billed based
on the time that you are connected to the Internet. When this feature is
enabled, the connection will be disconnected after a specified period of
inactivity (Max Idle Time). As soon as you attempt to access the Internet
again, the router automatically re-establishes your connection. If you
enable this feature, also enter the Max Idle Time, which is number of
minutes that the connection can be inactive; when this limit is reached,
the connection is terminated. The default Max Idle Time is 5 minutes.
Keep Alive: This feature ensures that your router is always connected to
the Internet. When this feature is enabled, the router keeps the
connection alive by sending out a few data packets periodically. This
option keeps your connection active indefinitely, even when it sits idle. If
you enable this feature, also enter the Redial Period to specify how
often the router verifies your Internet connection. The default period is
30 seconds.
- Transparent Bridge: Choose this option if you are using this router to
connect two network segments. Only one WAN interface can be set as
transparent bridge.
Specify WAN IP Address: The external IP address that your ISP
assigned to your account.
Subnet Mask: The subnet mask specified by your ISP.
Default Gateway Address: The IP address of the default gateway.
DNS Server (Required) 1: The IP address of the specified DNS server.
Optionally, enter a second DNS server. The first available DNS entry is
used.
Internal LAN IP Range: The internal LAN IP range that will be bridged.
The WAN and LAN of transparent bridge will be at the same subnet.

Cisco RV082 - Small Business VPN Router Specifications

General

VPN Tunnels	50
DHCP Server	Yes
Authentication	MD5, SHA1
Power Supply	12V DC, 1A
Humidity	10% to 85% non-condensing
LAN Ports	8 x 10/100 Mbps RJ-45
VPN Protocols	IPSec, PPTP, L2TP
Firewall	SPI
Encryption	DES, 3DES, AES
Memory	8 MB Flash, 32 MB DRAM
Operating Temperature	0 to 40°C
Storage Temperature	-4 to 158°F (-20 to 70°C)
Weight	0.69 kg