Name: Cisco RV082 - Small Business VPN Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cisco Small Business RV0xx Series Routers Administration Guide 38

Editing a DMZ Connection

Use the Edit DMZ Connection page to specify the settings for your DMZ. DMZ is

enabled by default.

IPv4

IPv6

The Edit DMZ Connection page appears after you click the Edit icon in the DMZ

Setting section of the Network page.

NOTE Before navigating away from this page, click Save to save your settings, or click

Cancel to undo them. Any unsaved changes are abandoned.

If you are using IPv4 addressing, enter the following information:

• Subnet: Choose this option to place the DMZ on a different subnet than the

WAN (default setting). Enter an IP address and subnet mask for the DMZ.

• Range: Choose this option to place the DMZ on the same subnet as the

WAN. Enter the range of IP addresses to reserve for the DMZ port.

Questions and Answers:

Need help?

Do you have a question about the Cisco RV082 - Small Business VPN Router and is the answer not in the manual?

Cisco RV082 - Small Business VPN Router Specifications

General