EasyManuals Logo
Home>Cisco>Network Router>RV320

Cisco RV320 User Manual

Cisco RV320
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #92 background imageLoading...
Page #92 background image
VPN
Client to Gateway
92 Cisco RV320/RV325 Administration Guide
8
- Version 4.9 supports Mac OS X 10.4 and 10.5
- Version 4.8 supports Intel based Linux
To set it up Easy VPN, configure a group password on this page, and add a
username and password for each Cisco VPN Client users in the User
Management Table in the User Management section. When adding a user,
the Unassigned group should be selected. The other groups are used for
SSL VPN.
Configure Tunnel or Group VPN
Enter the following information:
Tunnel Name—Name to describe the tunnel. For a single user, you can enter
the username or location. For a group VPN, you could identify the group
business role or location. This description is for your reference and does not
have to match the name used at the other end of the tunnel.
Interface—WAN port.
Keying Mode—Choose the key management method:
- Manual—Generate the key yourself, but do not enable key negotiation.
Manual key management is used in small static environments or for
troubleshooting purposes. Enter the required settings.
- IKE (Internet Key Exchange) with Preshared Key—Use this protocol to
set up a Security Association (SA) for your tunnel. (This setting is
recommended.) If you selected Group VPN, this is the only option
available.
- IKE with Certificate—Use a certificate to authenticate a remote IKE
peer.
Enable—Check to enable this VPN.
Configuring Easy VPN
Enter the following information:
Name—Name to describe the tunnel. For a single user, you can enter the
username or location. This description is for your reference and does not
have to match the name used at the other end of the tunnel.
Minimum Password ComplexityWhen enabled, the password minimum
requirements are:
- Eight characters in length.

Table of Contents

Other manuals for Cisco RV320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV320 and is the answer not in the manual?

Cisco RV320 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB version2.0
USB ports quantity2
Ethernet LAN (RJ-45) ports6
Gigabit Ethernet (copper) ports quantity4
Routing protocolsRIP-1, RIP-2
Supported network protocolsIPv4, IPv6, Static IP, PPPoE, PPTP, DNS, DynDNS
VPN supportIPsec, L2TP, DPD, DNS
Firewall securityPort Address Translation (PAT) firewall, Stateful packet inspection (SPI) firewall, Network address translation (NAT) firewall
Security algorithms128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, HTTPS, MD5, SHA-1, SSL/TLS
VPN tunnels quantity25
Authentication methodSHA-1, MD5
MAC address filtering-
CertificationFCC, CE, UL, cUL, CB, CCC, BSMI, KC, Anatel
Storage temperature (T-T)0 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Product colorBlack
Rack mountingNo
LED indicatorsActivity, LAN, Link, Power, USB, WAN
Input current1.5 A
Output voltage12 V
Weight and Dimensions IconWeight and Dimensions
Depth44 mm
Width206 mm
Height132 mm
Weight- g

Related product manuals