Cisco SG220-26P Administration Guide

Administration: Discovery
Configuring LLDP
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 97
8
- Size (Bytes) —Total LLDP MED extended power via MDI packets byte
size.
-
Status —If the LLDP MED extended power via MDI packets were sent, or
if they were overloaded.
• 802.3 TLVs
-
Size (Bytes) —Total LLDP 802.3 TLVs packets byte size.
-
Status —If the LLDP 802.3 TLVs packets were sent, or if they were
overloaded.
• LLDP Optional TLVs
-
Size (Bytes) —Total LLDP optional TLVs packets byte size.
-
Status —If the LLDP optional TLVs packets were sent, or if they were
overloaded.
• LLDP MED Inventory
-
Size (Bytes) —Total LLDP MED inventory TLVs packets byte site.
-
Status —If the LLDP MED inventory packets were sent, or if they were
overloaded.
• 802.1 TLVs
-
Size (Bytes) —Total LLDP 802.1 TLVs packets byte size.
-
Status —If the LLDP 802.1 TLVs packets were sent, or if they were
overloaded.
• Total
-
To t a l ( B y t e s ) —Total number of bytes of LLDP information in each packet.
-
Available Bytes Left —Total number of available bytes left for additional
LLDP information in each packet.

Cisco SG220-26P Specifications

General

Model	SG220-26P
Ports	26
PoE Ports	24
Switching Capacity	52 Gbps
Forwarding Rate	38.69 Mpps
Layer	Layer 2
Power Supply	Internal
VLANs Supported	256
Management	Web-based GUI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Dimensions	440 x 44 x 257 mm
Weight	3.3 kg