Cisco Small Business SPA525G2 - Connecting Phone Components

Installing Your Phone
Connecting the Handset
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide 24
2
Connecting the Handset
STEP 1 Find the longer end of the coiled phone cord. Insert it into the back of the phone
base in the slot marked with a phone symbol. This port is labeled #5 on Figure 1.
STEP 2 Insert the short end of the handset cord into the jack at the bottom of the handset
(not shown).
Figure 1 Cisco SPA 525G/525G2 IP Phone Connections