Using the Web Configuration Utility
Configuring Voice User Parameters
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide 88
5
Do Not Disturb (DND Setting)
Use the Do Not Disturb to prevent incoming calls from ringing your phone. If you
have voice mail configured, incoming callers are sent to voice mail. If voice mail is
not configured, callers hear a busy signal or a message.
Display Text Messages on Receiving Phone (Display Text
Message on Recv Setting)
Use the Display Text Messages on Receiving to enable or prevent text messages
from displaying on your phone.
Text Messages From a Third Party (Text Message From 3rd
Party)
Use the Text Messages From a Third Party to enable or prevent text messages
from a third party from displaying on your phone.
Audio Volume
The Audio Volume section controls volume levels of several parts of your device
and overall audio tone.
Ringer Volume
Speaker Volume
Headset Volume
Headset Volume
Bluetooth Volume
Enter a volume between 1 and 15, with 1 being the lowest
level.
To Next Page
Loading...
