Cisco Small Business SPA525G2 - Placing a Three-Way Conference Call

Using Basic Phone Functions
Placing a Three-Way Conference Call
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide 46
3
STEP 3 Select the call from the list and press Dial again.
NOTE For advanced call features like call park, call pickup, group pickup and so on, see
the user guide from the service provider.
Placing a Three-Way Conference Call
To initiate a conference call:
STEP 1 Press the Conf button during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.
STEP 3 Press the Conf button again. All three parties are connected in the conference call.
When you hang up, the other two parties are disconnected. To keep the other
parties in a call, but disconnect yourself from the call, press Join.
To conference two active calls on your phone:
STEP 1 On one of the active calls, press ConfLx. If you have two active lines, the calls are
conferenced. If you have more than two active lines, you must scroll to choose the
line you want to conference in.
STEP 2 Press Select.