Using Advanced Phone Features
Viewing the Wireless Connection Status
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide 81
4
STEP 1 Press Setup.
STEP 2 Scroll to Status and press Select.
STEP 3 Scroll to Phone Status and press Select. You can view the following information:
• Phone Status—Up time and packets sent/received.
• Extension Status—Registration status, such as when it was registered.
• Line Status—Active calls and call information.
• Provisioning Status—If a profile rule was used, and the status
• Call Statistics History—Information about individual calls.
Viewing Peripheral Status
To view information about phone peripherals, such as a USB memory stick or a
Cisco Attendant Console:
STEP 1 Press Setup.
STEP 2 Scroll to Status and press Select.
STEP 3 Scroll to Peripheral Status and press Select. You can view the following
information:
• USB Status
• Attendant Console (Attn Cons) Status
Viewing the Wireless Connection Status
If you have set up your wireless connection (described in “Connecting Your
Phone to the Wireless Network” section on page 28), you can view the status of
your wireless connection.
STEP 1 Press Setup.
STEP 2 Scroll to Network Configuration and press Select.
To Next Page
Loading...
