Cisco Small Business SPA525G2 - Restarting Your Phone; Viewing Phone, Network, and Call Information; Viewing Product Information

Using Advanced Phone Features
Restarting Your Phone
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide 79
4
Restarting Your Phone
It might be necessary to restart your phone. For example, if the screen locks up. To
restart your phone:
STEP 1 Press Setup.
STEP 2 Scroll to Device Administration and press Select.
STEP 3 Scroll to Restart and press Select.
Viewing Phone, Network, and Call Information
The Cisco SPA525G and Cisco SPA525G2 provide menus to view status and
network information about your phone.
Viewing Product Information
To view product information about your phone:
STEP 1 Press Setup.
STEP 2 Scroll to Status and press Select.
STEP 3 Select Product Information. You can view the following information:
017111 Configure the phone to prefer the G711a codec for all calls.
027110 Force the phone to use the G711u codec for all calls.
027111 Force the phone to use the G711a codec for all calls.
0172632 Configure the phone to prefer the G726r32 codec for all calls.
0272632 Configure the phone to force the G726r32 codec for all calls.
Code Definition