ARES 506-606 - 02.2005 - GB
E.11
ECO MODE (INDICATOR (4) ON)
This mode is suitable to fuel savings. Work is performed at a
lower engine speed, where specific consumption is low. The
graph illustrates gear shifting by the automatic system in
economy mode.
Condition for shifting to next higher gear (area A on the graph):
A - Accelerator pedal depressed by more than 85% of its overall
travel + engine speed higher than 1680 rpm.
Condition for shifting to lower gear: (areas B, C and D on the
graph).
B - Accelerator pedal depressed by more than 85% of its overall
travel + engine speed less than 1350 rpm.
C - Accelerator pedal depressed by 25 to 85% of its overall travel
+ engine speed less than 20% relative to accelerator rating.
D - Accelerator pedal depressed by less than 25% of its overall
travel + engine speed less than 1400 rpm (engine braking
function).
QUADRACTIV ACTION LIMITING
It is possible to limit the action of the QUADRACTIV on 2 or 3 of
the 4 quadrupler torque ratios. This function enables you to
restrict the forward speed.
- Activate the Quadractiv function in Eco or Power mode by
pressing switch (1).
- Select a motion direction, using the reverser (G).
- Engage a mechanical ratio with the gear lever (E).
- Move the tractor.
- Then select the torque ratio you do not want to exceed, using
buttons (2) "+" and "-" on the gearshift lever or those located in
the right-hand pillar of the cab.
The function takes your request into account automatic gear
shifting is performed only within the desired gear range.
601hsn36
602msn03
601hsn53
601msn02
A
BCD
13
1
4
G
E1
2